Home
chevron_right
Store
chevron_right
Porsche
chevron_right
Panamera
chevron_right
Porsche Panamera (970, 971) PDK Transmission Calibration & Adaptation
Product description
Does your Porsche Panamera PDK gearbox shift with a jolt, make uneven shifts or show delays when the clutch engages? After clutch and valve wear, repair or a software update, the PDK gearbox needs new calibration. We perform electronic calibration of the gearbox clutches, hydraulics and gear shifts with the professional Porsche PIWIS diagnostic device according to the manufacturer's official technical instructions.
When does it need calibrating?
- After replacing gearbox parts, clutches, the hydraulic block or the control unit.
- After programming or updating engine or gearbox (DME/PDK) software.
- If you notice harsh gear changes (e.g. engine speed fluctuations during a shift without the clutch engaging immediately).
Adaptation rules and driving conditions after calibration:
The success and smoothness of gearbox adaptation depends directly on the driving profile. Full re-adaptation of the system takes about 200 km (125 miili). For the best result, follow these conditions:
- Clutch engagement point and torque adaptation: Drive in stable conditions, shifting between 4th and 8th gear and keeping engine speed between 1600 and 2000 rpm. The reduction gear oil temperature must be between 45°C and 110°C.
- Friction coefficient adaptation: Adaptation is done with upshifts under load. The ATF gearbox oil temperature must be between 65°C and 95°C.
- Driving recommendations: Drive longer distances in one go. Avoid short trips (where the gearbox does not reach operating temperature) and strictly avoid using Launch Control’ (launch control system) and sudden starts during the adaptation phase.